Projecta 12v 2000w Modified Sine Wave Inverter PROJECTA IM2000
2000 watt inverter
Notes Input 12V DC, 120A Max
NO LOAD CURRENT DRAW 0.8A
Output 230/240V AC 50Hz (Modified Sine Wave)
OUTPUT POWER 2000W Continuous (4000W Peak)
INVERTER CLASSIFICATION Equipotentially Bonded (EPB)
LOW BATTERY ALARM 10.5 Volt
SHUTDOWN 10.0 Volt (±0.2V)
COOLING FAN Automatically temperature controlled
THERMAL SHUTDOWN 65°C (±5°C)
FUSE 12 x 20A
IDEAL BATTERY SIZE 85-400Ah
MINIMUM BATTERY SIZE 85Ah, 600CCA
RUN TIME WITH 1000W ON 85AH BATTERY – 5 min
RUN TIME WITH 100W GLOBE ON 75AH BATTERY – 7 hours
APPROVALS Electrical Safety, EMC
L.E.D LIGHT INDICATION
GREEN LIGHT ON Power on
RED LIGHT ON Accompanied by audible alarm indicates a fault
Peak Power Technology
Heavy duty MOSFET transistors and a high output transformer allow the inverter to power maximum loads from start up.
Superior Noise Free Filtering
All Projecta inverters have EMC filtering and large electrolytic capacitors for smoother power delivery so your TV, radio, DVD, computers, etc, run as though they are on mains power.
Twin 240V Power Outlets
Any combination of sockets can be used, provided the combined load does not exceed the inverter’s rating.
Low Battery Voltage Protection
To protect your battery from permanent damage caused by a deep discharge, the IM2000 has a low battery warning buzzer and shut off.
Thermostatically Controlled Cooling Fan
A built in cooling fan ensures that the inverter continues to provide reliable power for longer periods when under heavy loads.
Internally Bonded Earth System
All Projecta inverters have an internally bonded earth system. This ensures that in the event of a 240V appliance failing, the inverter will immediately shut down, preventing any chance of electrocution.
Allows the inverter to be easily mounted.
Only logged in customers who have purchased this product may leave a review.